This part describes the parameter of the digital conditions.
|
Parameter |
Description |
|---|---|
|
In use |
If the switch is active, the digital actual value is compared with the related setpoint value or a fixed value. If the comparison according the transition type ist true, the condition is true. |
|
Actual value |
This selection defines an actual value, which is compared with its setpoint or a fixed value according to the transition type. |
|
Fixed value |
This switch defines a fixed value for comparison. |
|
Transition type |
This selection defines the comparison condition. Possible selections are:
|
The digital conditions must be configured in the JUMO smartWARE Setup variTRON. They can be found as follows:
Configuration > PT Configuration > Process steps > Process steps > 'Name' > Definition