Digital setpoints

This part describes the parameters of the digital setpoints.

Parameter	Description
In use	This switch defines the visibility of the digital setpoint in smartWARE Program and the visualization. If the switch is active, the digital setpoint is displayed according the state definition and together with the icon, which are defined in 'Inputs and outputs'.
Setpoint link 1/2	Each of these selections define an interaction when the setpoint input value is accepted. Possible selections are: ‘No link’ (default) defines that no interaction takes place ‘Only one active digital setpoint’ means that the defined ‘Setpoint’ is deactivated when the setpoint is entered.
Setpoint 1/2	Each of these selections defines a setpoint with which the defined interaction, takes place.
Default setpoint	Initial setpoint when adding the process step to a program

The digital setpoints must be configured in the JUMO smartWARE Setup variTRON. They can be found as follows:
Configuration > PT Configuration > Process steps > Process steps > 'Name' > Definition